Manual for CAME ZL92 Control Board Includes ZL92, V21EN. Press the Right Mouse Button / Control-Click and Select “Save Target / Link As” to Download. The ZL19N control panel is engineered and built by Came Cancelli Automatici S.p.A. to Came Cancelli Automatici employs an ISO certified quality. In this condition I went a great while, but when comforting time was come, I heard .}Zl. Acts | my love, thou art my love; and nothing shall separate. Gl.
|Published (Last):||20 August 2016|
|PDF File Size:||20.51 Mb|
|ePub File Size:||12.45 Mb|
|Price:||Free* [*Free Regsitration Required]|
CAME – TOP series transmitter coding instructions
camme Check the receiver is compatible before attempting to programme either. This gives combinations. Two channel transmitters have 6 pairs of gold pins arranged in 6 columns. Open the battery compartment and hold with the battery towards you. Four channel transmitters only have the programming jumper column.
It camd not possible to read the code from a programmable decoder. Transmitters are supplied with a CAME default code  so that the system can be commissioned. Remote control handset and keyfob transmitters for electric garage door and gate operators by mail order Secure On-Line Shopping and Same-Day despatch Items in Basket: Its link is stored on one pin only.
Transmitter buttons The TM and TM are two button transmitters whose transmit channels can be selected by programming jumpers. Remove the programming link immediately and store. The transmitters have an internal bleeper that has to sound four times before the full code is sent.
Coding TOP transmitters send a 12 bit code made up from a 10 bit site code acme a 2 bit channel code. The sixth column of a two channel transmitter is for programming. Receiver coding On old model receivers, the ten bit site code is set on a DIP switch at the top of the receiver board. Channel setting for the left button is made by linking columns 1 or 2. If the transmitter you have has buttons zl5 the side and has a green light, they are older models but still compatible.
Each receiver has a 10 bit DIP switch to set the site code, which is common to all the channels.
Our online shop is powered by. Click image to enlarge CAME ref: To start programming, place the jumper across both pins. Remote control handset and keyfob transmitters for electric garage door and gate operators by mail order. Programmable receivers treat the channel code as an cwme of the site code.
Technical Documents | CAME UK
Receiver channels The outputs on the single and camr channel receivers can be selected by jumper link to respond to any of the four transmit channels. You will need cqme read the site code from the receiver DIP switches and make a note of the sequence. The transmitter beeps each press of a button, and twice at the end of the sequence of ten presses.
All other trademarks are the property of their respective owners. It is recommended you set a random site code for new installations.
We also accept payments via PayPal. Columns are numbered from right to left.
The four channel receiver has a separate output for each channel. Two button transmitters are supplied programmed to CH1 left button and CH2 right button. The transmitter code needs to have been written down safely at the commissioning stage.
If the transmitter has a red light and a green belt clip, it is a BIM type that is not compatible with the TOP series. Compatibility The transmitter button colour determines the frequency.